Description
This tuning package will get you up to 595 PS and 588 Nm of torque. Below is our list of recommended software and hardware to achieve this.
- REVO Stage 1 Software up to 605ps & 588 Nm of torque.
- Replacement Air filter element’s from K&N.
- Milltek full exhaust system.
- NOTE: Power is dependant on Fuel Quality, Performance Settings and Conditions.
Our Package consists of the optimisation of engine management software, performance air filter and Milltek Sport exhaust system. The Milltek exhaust is available in a number of options. Adding a sports exhaust system will not only give a pleasant soundtrack but also enable the engine to breath more easily adding to its efficiency and producing more power and torque.
Stage 2 Performance Software has been specifically developed to attain the best possible performance from the V10 R8 with a bolt-on performance exhaust. With a vehicle that’s capable of 200mph Revo adjustability really comes into it’s own. Throttle response is a personal preference; lower settings give you more control using the throttle and higher values can give the car a very aggressive ‘feel’ when you lightly touch the throttle, neither is wrong so the setting is set up to suit the individual driver and the conditions the car is being used in. Fuelling and Timing adjustment is set up to suit the fuel quality run and again conditions, we give the R8 V10 plenty of headroom on the road so should it be taken to V-Max and put through its paces on the track it will be 100% happy. If the car is being used in various conditions the Revo SPS is very beneficial, the three user presets can be set up to give a number of performance setting combinations. For example, a 99ron road, track, and low octane mode could be set, giving you the best setup for each condition. If the adjustability sounds daunting, don’t worry our Dealer Network will make sure your R8 is set up to suit the fuel and conditions you use it in and you can just enjoy it!
